The Project, Page 1

(You may click on a picture to view a larger version)

The first thing I had to do was locate a toaster. I really wanted a 2-slot toaster, but found that everything I wanted to add to this system would not fit. So I purchased a GE 4-slot chrome toaster.

 

The next step was to remove the base.

 

With the base off of the toaster I then had to remove the toasting heater box.

 

Here you can see the left over toaster guts. I had to save the flat piece in the front. This is what holds the top of the toaster together and connects the base to the whole assembly.

Next Page

[Home] [ToasterPC.com] [Project Page 1] [Project Page 2] [Project Page 3] [Project Page 4] [Picture Gallery]